- Wireless Networking Equipment[144]
- Alarm[10]
- Remote Control[37]
- Fishing[1]
- Copiers[1]
- Electronic Data Systems[2]
- Telecom Parts[10]
- Speaker & Horn[7]
- Other Telecommunications Products[10]
- Other Electronic Components[1]
- Remote Control Switches[2]
- Access Control System[4]
- Other Active Components[1]
- Electronic Products & Components Processing[1]
- Other Access Control Products[1]
- Other Accessories & Parts[7]
- Contact Person : Mr. Yin Mike
- Company Name : Shenzhen KST Technology Co., Ltd.
- Tel : 86-0755-27593269,13148759737,13682630429
- Fax : 86-0755-27840581
- Address : Guangdong,SHENZHEN,No.905, B place, Yi Da Building, the 43th area, Baoan District,
- Country/Region : China
- Zip : 518005
AM/OOK rolling code receiver module KST-RX702
Detailed Product Description
AM/OOK rolling code receiver module KST-RX702
decoder L4 & unlock M4
Technical parameter:
(1) operating voltage: +5VDC
(2) operating current: ≤2Ma
(3) operating frequency: 315MHz- 433.92MHz
(4) modulation: AM
(5) receive sensibility: -102dB
the discrimination between lock with decoder L4 & unlocked M4
Operation:
1. Press the LEARN button, a sound of buzz indicates remote control have been in the learning State.
2. Press any button one time, buzzing one time indicates the signals have been received. then press again, the second buzz indicate the remote control learns the signal and exit automatically.
3. Receiving no signals within ten seconds after entering, the buzzer buzzes five times and exit automatically.
4. Press the LEARN button (1S), then the buzz indicates that the remote controls have been in learning state. If press the button all the time, all the remote controls which are in the state of learning will be cleared away after three sounds of buzz in six seconds.
5. The receiver module can recognize maximum 300 remote controls. As it recgnizes up to 19 remote controls at the same time, the other remote controls are only to be recognized on the conditon that all the recgnized remote controls must be removed, otherwise, please repeate the operation of 1&2.
6. Buzzer buzzes one time after receiving valid remote signal, and gives coding to signal, then outputs high voltage (+5v) signal at the counterpart output window.
